Key facts
- Türkiye is one of the ten largest crude steel producers in the world, according to worldsteel’s top 10 table.
- An import of coil runs in nine steps: specification, quotation, order, production slot, packing, loading, shipping, documents and receiving.
- Published payload tables give about 25.0 t [55,100 lb] for a 20 ft container and 27.6 t [60,800 lb] for a 40 ft container, so single coil weight decides between container and break-bulk shipping.
- FOB, CFR and CIF are Incoterms rules for sea transport, published by the International Chamber of Commerce.
- Reinwent is a trading and sourcing company that sources coil from manufacturers in Türkiye.
Why do buyers source steel coil in Türkiye?
worldsteel’s table of the top ten crude steel producers lists Türkiye, and the Turkish Steel Exporters’ Association describes the country as one of the largest steel producers and exporters. That is the whole case this guide makes about the country: coil is rolled, coated and painted from that steel base, so a buyer deals with an established steel industry. Whether a given mill can meet your size, grade, coating and packing is a question for each order, not for statistics.
Reinwent is a trading and sourcing company that sources coil from manufacturers in Türkiye. We take one specification, match it with manufacturers that can supply it and follow the order through to delivery. To see what an intermediary does and does not do, read what a steel trading company does.
What are the steps of an import?
The sequence is the same for every coil type. The timing of each step is confirmed in the quotation, and we state no fixed durations here.
| Step | What happens | What you provide or check |
|---|---|---|
| 1. Specification | The coil is defined in one place | Type, standard, grade, size, coating, weight, packing |
| 2. Quotation | Offers are set on one basis | Delivery term, port, quantity |
| 3. Order | Specification and terms are confirmed in writing | Read the quotation against your enquiry |
| 4. Production slot | The order is placed in the manufacturer's schedule | Any change request before production starts |
| 5. Packing | Coils are wrapped, strapped and labelled | Label content, eye orientation, inner diameter |
| 6. Loading | Coils are loaded into containers or on the vessel | Container size or break-bulk preference |
| 7. Shipping | The cargo moves to the destination port | Port and delivery term |
| 8. Documents | The shipping documents are issued | The document set your bank and broker need |
| 9. Receiving | The cargo is cleared and unloaded | Handling gear, coil weight and outer diameter |
For the manufacturer side of step 4, see how to evaluate a steel coil manufacturer in Türkiye (see below). For the buyer side of steps 1 to 3, the importers guide to steel coil goes through a full checklist.
What should an enquiry for coil contain?
A complete enquiry lets every offer be put side by side. Use this checklist:
- Coil type. Pickled and oiled hot rolled, cold rolled, galvanized, prepainted or Aluzinc coil. The coil range shows the five types and their size limits.
- Standard and grade. The coil standards guide explains the designations; for coated coil add the coating designation.
- Thickness and width in millimetres, and whether the coil is full width or slit coil. The thickness and width guide shows how the standards define them, and the slit versus full-width guide covers the choice.
- Coil weight and diameters. Inner diameter, maximum coil weight and outer diameter your handling allows. Strip mass per metre is thickness (mm) × width (mm) × 7.85 ÷ 1000 kilograms, and the coil weight calculator does the arithmetic.
- Packing and marking. Eye orientation, label content, any special request.
- Quantity, destination and delivery term.
- Inspection or sample needs, and anything your customer’s tender requires.
Send it through the quote request form. The quotation comes within 12 hours at the latest.
How are packing, loading and shipping decided?
Coils ship either eye to sky (axis vertical) or eye to the side (axis horizontal), strapped and supported on pallets, cradles or beams. In a container the coil never rests directly on the floor. The packing and container loading guide gives the details.
The choice between container and break-bulk follows the coil weight. Published payload tables give about 25.0 t [55,100 lb] for a 20 ft container and 27.6 t [60,800 lb] for a 40 ft container. Our coil pages list coil weights up to 30 t [66,100 lb] (15 t [33,100 lb] for prepainted coil), and a single coil above the payload cannot go into that container. Break-bulk cargo is stowed on the ship as individually counted units and needs more handling at both ports. The decision is made per order.
The delivery term states who arranges and carries what. FOB, CFR and CIF are Incoterms rules from the International Chamber of Commerce, the current edition has 11 rules, and these three apply to sea and inland waterway transport. FOB names a port of shipment, CFR and CIF a port of destination. Name the rule and the port in the enquiry.
Which documents does a coil shipment need?
The documents depend on the destination country, the goods and the payment method, so this guide states them only in general terms. Buyers commonly ask for:
- Commercial invoice, issued by the exporter. It is a customs document in foreign trade, with the parties, the goods, the country of manufacture and often the Harmonized System codes.
- Packing list, which lists what is in each package or container.
- Bill of lading, issued by the carrier or its agent. It is a receipt for the cargo, evidence of the contract of carriage and a document of title.
Wikipedia notes that for payment by letter of credit or documentary collection the bill of lading remains a vital document, so agree the document set before the order, with your bank and your customs broker. To state the goods correctly, read how steel coil is classified for customs.
What about inspection and receiving?
Inspection is optional and agreed per order. EN 10021, the general technical delivery conditions for steel products, lists the items a purchaser may specify when ordering, including marking and packing, so use the enquiry to say what you want checked and when. On arrival, check the coil labels against the order, the coil weight against the documents and the packing for damage, and make sure your crane or decoiler matches the outer diameter, inner diameter and coil weight you stated. For the technical drivers behind each offer, see what drives the cost of steel coil.
Related coil guides: steel coil HS codes; steel coil importers guide; steel coil manufacturers in Türkiye; steel coil cost drivers.
Read next: steel coil: Türkiye vs China, steel coil FAQ.

Steel



