Cold rolled steel coil from Türkiye

Reinwent supplies cold rolled steel coil (CRC) in Full Hard and annealed condition from Türkiye (Turkey) in 0.20–3.00 mm (0.008–0.118 in) thickness and 600–1600 mm (23.62–62.99 in) width, in grades DC01, DC03, DC04, DC05, DC06, to EN 10130, full-width or slit. We are a supplier and trading company with an operations office in Istanbul, and we send you a quotation within 12 hours at the latest.

Why source cold rolled coil in Türkiye?

Cold rolled coil is bought on tight requirements: thickness, flatness, surface and the condition of the steel. A request that leaves one of them open comes back as offers nobody can compare. Reinwent asks suppliers in Türkiye for offers on one written specification and puts them side by side.

We are a trading company with an operations office in Istanbul. We follow the order through the quotation, the sample, production and shipment, and you deal with one contact throughout.

Which cold rolled coil sizes can you order from Turkey?

The table comes from our cold rolled steel coil product page. The limits depend on the producer and on whether the coil is Full Hard or annealed, and we confirm them in the quotation.

Cold rolled steel coil: ranges we quote
PropertyValue
Thickness0.20–3.00 mm (0.008–0.118 in)
Width600–1600 mm (23.62–62.99 in)
Slit coil width20–1500 mm (0.787–59.06 in)
Coil inner diameter508–610 mm (20.00–24.02 in)
Coil weightUp to 30 t (about 66,100 lb)
Steel gradesDC01, DC03, DC04, DC05, DC06
StandardsEN 10130

Full-width coil comes on an inner diameter of 508–610 mm (20.00–24.02 in) and weighs up to 30 t (about 66,100 lb). Slit coil is cut from it in widths of 20–1500 mm (0.787–59.06 in) within the thickness range. For help choosing the size, use the coil thickness and width selection guide, and for the choice between a narrow strip and the master coil, slit coil vs full-width coil.

Full Hard or annealed: which cold rolled coil do you need?

Full Hard coil is cold rolled strip that has not been annealed. It is strong and hard and is not meant for forming. Annealed coil has been softened by annealing and then temper rolled, which gives the ductility, flatness and surface needed for forming and for parts that are painted or coated afterwards.

Say which condition you need when you ask for a quotation, together with the grade. The guide on cold rolled coil annealing and surface quality explains the stages, and hot rolled vs cold rolled coil helps if you are still deciding between the two.

How do you buy cold rolled coil from Türkiye through Reinwent?

You write the specification once, and the same five steps carry it from comparison of offers to delivery.

  1. Price research

    We compare offers and match your request with the right manufacturer.

  2. Quotation

    You receive price, lead time and terms.

    Within 12 hours
  3. Sample and testing

    Production starts after you approve the sample and test results.

  4. Production tracking

    We follow the order at the factory until it is ready to ship.

  5. Shipment and delivery

    We track the shipment until it reaches you.

How is cold rolled coil shipped from Türkiye?

Cold rolled strip is valued for its surface, so the coil is wrapped, strapped and protected against moisture and handling marks. The protection, the packing and the loading plan are agreed in the quotation for each order.

Coils ship by sea in containers or as break-bulk cargo. Because a coil can weigh up to 30 t (about 66,100 lb), the weight per coil and the eye orientation are fixed with the forwarder. Read the steel coil packing and container loading guide before you set a handling limit, and use the steel coil weight calculator to check weight against width.

Which standard covers cold rolled coil?

EN 10130 covers cold rolled, uncoated low carbon steel flat products for cold forming, and its grades are named DC01, DC03, DC04, DC05, DC06. Name the grade in your request, because which grades are available depends on the producer.

The steel coil grades guide explains how the DC grade numbers rise with formability, and the steel coil standards guide places EN 10130 next to the standards for hot rolled and coated coil. For the pickled hot rolled coil that is the usual feedstock, see pickled hot rolled coil from Türkiye.

What do buyers ask about cold rolled steel coil?

Where can I buy cold rolled coil in Turkey?

Through Reinwent, a supplier and trading company with an operations office in Istanbul. We ask suppliers in Türkiye for offers on your specification, compare them on one basis and send you a quotation within 12 hours at the latest.

What is the difference between Full Hard and annealed coil?

Full Hard coil is cold rolled strip that has not been annealed, so it is strong and hard and is not made for forming. Annealed coil is softened by annealing and then temper rolled, which gives it the ductility, flatness and surface needed for forming.

What are DC01 to DC06?

They are the grade names of EN 10130 for cold rolled low carbon steel for cold forming. We quote DC01, DC03, DC04, DC05, DC06, depending on the producer, and the grade is named in the quotation.

What thickness and width can I order?

Thickness runs 0.20–3.00 mm (0.008–0.118 in) and width 600–1600 mm (23.62–62.99 in). Coils weigh up to 30 t (about 66,100 lb) on an inner diameter of 508–610 mm (20.00–24.02 in). The exact limits depend on the producer and on the condition, so they are confirmed at quotation.

Which standard applies?

EN 10130, which covers cold rolled, uncoated low carbon steel for cold forming. We quote to EN 10130.

Is hot rolled or cold rolled coil right for me?

Cold rolled coil is thinner and has a better surface and tighter tolerances, and it takes an extra rolling and annealing stage to make. The guide on hot rolled vs cold rolled coil sets out when each is the better choice.

Can cold rolled coil be slit?

Yes, in widths of 20–1500 mm (0.787–59.06 in) within the thickness range of the coil. Slit width, tolerance and coil weight are agreed in the quotation.

What should I include in my request?

The thickness and width, Full Hard or annealed, the grade or standard, the surface requirement, full-width or slit coil, the coil weight, the quantity and the destination. Reinwent replies within 12 hours at the latest.

More on cold rolled steel coil

Other steel coil from Türkiye

Sources

Request a quote

Send the thickness, width, condition, grade and quantity you need and we will check it with producers in Türkiye. You receive a quotation within 12 hours at the latest.

Request a quote