Galvanized steel coil from Türkiye

Reinwent supplies hot-dip galvanized steel coil (GI coil) from Türkiye (Turkey) in 0.20–4.00 mm (0.008–0.157 in) thickness and 600–1650 mm (23.62–64.96 in) width, with a zinc coating of 50–600 g/m² (0.16–1.97 oz/ft²), to EN 10346 and ASTM A653/A653M, full-width or slit. We are a supplier and trading company with an operations office in Istanbul, and we send you a quotation within 12 hours at the latest.

Why source galvanized steel coil in Türkiye?

Türkiye is one of the ten largest crude steel producers in the world, according to worldsteel and the Turkish Steel Exporters' Association (CIB). Galvanized coil is among the products its producers and service centres offer, and several of them quote overlapping thickness, width and coating ranges.

Reinwent sources the coil from producers in Türkiye. For each order we collect offers from many suppliers and put them on one basis, so you compare the same thickness, width, coating mass and terms rather than quotations that differ in every line. Our operations office is in Istanbul, and we manage the order from the first request to delivery.

Which galvanized coil sizes and coatings can you order from Turkey?

The table shows the range we quote, taken from our galvanized steel coil product page. The exact limits depend on the producer, the grade and the coating mass, and we confirm them in the quotation.

Galvanized steel coil: ranges we quote
PropertyValue
Thickness0.20–4.00 mm (0.008–0.157 in)
Width600–1650 mm (23.62–64.96 in)
Slit coil width20–1500 mm (0.787–59.06 in)
Coil inner diameter508–610 mm (20.00–24.02 in)
Coil weightUp to 30 t (about 66,100 lb)
Coating mass50–600 g/m² (0.16–1.97 oz/ft²) (both sides together)
Coating designationZ
Steel gradesDX51D+Z to DX57D+Z, S220GD+Z to S550GD+Z
StandardsEN 10346, ASTM A653/A653M

The coating mass is the zinc on both sides together, so 50–600 g/m² (0.16–1.97 oz/ft²) is the total and not the figure per side. The grades are DX51D+Z to DX57D+Z; S220GD+Z to S550GD+Z, and the +Z in the name marks the zinc coating. Full-width coil comes in the widths above on an inner diameter of 508–610 mm (20.00–24.02 in), and slit coil in widths of 20–1500 mm (0.787–59.06 in) within the thickness range. Which one suits you is covered in slit coil vs full-width coil, and the choice of size in the coil thickness and width guide.

How do you buy galvanized coil from Türkiye through Reinwent?

You send the specification, we compare offers, and the order is followed from the sample to the port of arrival.

  1. Price research

    We compare offers and match your request with the right manufacturer.

  2. Quotation

    You receive price, lead time and terms.

    Within 12 hours
  3. Sample and testing

    Production starts after you approve the sample and test results.

  4. Production tracking

    We follow the order at the factory until it is ready to ship.

  5. Shipment and delivery

    We track the shipment until it reaches you.

How is galvanized coil shipped from Türkiye?

Galvanized coil travels by sea, in containers or, for the heaviest coils, as break-bulk cargo. A coil weighs up to 30 t (about 66,100 lb), and published container payloads are below that figure, so the weight per coil is agreed with the loading plan. The coil is loaded eye to sky (axis vertical) or eye to the side (axis horizontal) on cradles, and the carrier and the shipper decide which per load.

Tell us the coil weight and outer diameter your handling allows, the inner diameter your decoiler needs, the width and the destination port. The steel coil packing and container loading guide shows the packing options, and the steel coil weight calculator estimates the outer diameter from weight and width.

Which standards and coating designations apply to galvanized coil?

EN 10346 covers continuously hot-dip coated flat products for cold forming, including zinc coating (Z), and ASTM A653/A653M covers steel coated with zinc by the hot-dip process. Name the standard on your enquiry, because the two write the coating differently.

EN 10346 states the coating with a Z designation and the mass in grams per square metre. ASTM A653 uses G designations such as G90, which is 0.90 oz/ft² of zinc on both sides together. We state the standard you order and do not convert one designation into the other. The steel coil standards guide and the guide to grade names such as DX51D explain the system.

Galvanized or Aluzinc coil?

Galvanized coil is coated with zinc only. Aluzinc is coated with an aluminium-zinc alloy of about 55% aluminium, under the letters Z and AZ of the same standard. The guide galvanized vs Aluzinc coil compares them, and spangle and surface finish explains the look of the zinc layer. If Aluzinc is your choice, see Aluzinc coil from Türkiye.

What do buyers ask about galvanized steel coil?

Where can I buy galvanized steel coil in Turkey?

Through Reinwent, a supplier and trading company with an operations office in Istanbul. We compare offers from many suppliers on one basis, manage the order and send you a quotation within 12 hours at the latest. We sell coil from Türkiye and, on request, from other qualified mills.

Which standards apply to galvanized coil from Türkiye?

We quote to EN 10346 and ASTM A653/A653M. EN 10346 covers continuously hot-dip coated flat products for cold forming, and ASTM A653/A653M covers steel coated with zinc by the hot-dip process. Which grades are available depends on the producer.

What thickness, width and coating mass can I order?

Thickness runs 0.20–4.00 mm (0.008–0.157 in) and width 600–1650 mm (23.62–64.96 in). The zinc coating is 50–600 g/m² (0.16–1.97 oz/ft²) (both sides together), with the designation Z. The exact limits depend on the producer, the grade and the coating mass, so they are confirmed at quotation.

Can galvanized coil be slit?

Yes. Slit coil is full-width coil cut lengthwise into narrower coils, in widths of 20–1500 mm (0.787–59.06 in). Slit width, tolerance and coil weight are agreed in the quotation, and the guide on slit and full-width coil shows when each is the better choice.

What do DX51D+Z and S250GD+Z mean?

They are EN 10346 grade names. In DX51D+Z the +Z shows a zinc coating, and DX grades are for forming. S grades such as S250GD+Z are structural grades named by yield strength. We quote DX51D+Z to DX57D+Z; S220GD+Z to S550GD+Z, depending on the producer.

What does G90 mean for a US buyer?

G90 is an ASTM A653 coating designation: 0.90 oz/ft² of zinc, counted on both sides together. US specifications give the coating in ounces per square foot and metric ones in grams per square metre, and one ounce per square foot equals 305 grams per square metre.

How is galvanized coil shipped, and how heavy can a coil be?

Coils weigh up to 30 t (about 66,100 lb) and ship by sea in containers or as break-bulk cargo. The loading plan, the eye orientation and the packing are confirmed for each order with the forwarder.

What should I include in my request?

The thickness and width, the coating mass or designation, the standard and grade, full-width or slit coil, the coil weight, the quantity, the destination port and the delivery term you prefer. If something is not decided yet, say so and we check it with the producers. Reinwent replies within 12 hours at the latest.

More on galvanized steel coil

Other steel coil from Türkiye

Sources

Request a quote

Send the thickness, width, coating mass and quantity you need and we will check it with producers in Türkiye. You receive a quotation within 12 hours at the latest.

Request a quote