Steel coil weight calculator: weight, length, OD

Steel strip weighs thickness (mm) × width (mm) × 7.85 ÷ 1000 kilograms per metre, using a steel density of 7.85 g/cm³. A 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip weighs 7.85 kg per metre, so a 10 t coil holds about 1274 m. The calculator also gives the coil outer diameter, and the result is a theoretical figure.

Last updated

Steel coil weight calculator

Enter the strip thickness and width, choose what you know about the coil, and read the weight, length and outer diameter in metric and US units. Theoretical values for steel at 7.85 g/cm³.

Theoretical mass of uncoated steel strip per metre, and length in one tonne, at 7.85 g/cm³
Thickness × width (mm)kg per mlb per ftm per tonneft per tonne
0.5 × 10003.9252.637255836
0.6 × 10004.7103.165212697
1 × 10007.8505.275127418
1.5 × 125014.7199.89167.9223
2 × 150023.55015.82542.5139
3 × 125029.43819.78134.0111
4 × 150047.10031.65021.269.7

Key facts

  • Strip mass per metre in kg = thickness (mm) × width (mm) × 7.85 ÷ 1000. The density is 7.85 g/cm³ (7850 kg/m³, about 490 lb/ft³).
  • Length in metres = coil weight in kg ÷ kg per metre. Weight in kg = length × kg per metre.
  • Outer diameter OD = √(ID² + 4 × thickness × length ÷ π), all in millimetres, with the length in mm.
  • Coating mass in g/m² is stated for both sides together; the calculator adds coating mass × width per metre.
  • All results are theoretical: tolerance, coating, oil, packing and loose winding change the real weight.

The formulas

A strip is a long thin rectangle. One metre of it has a volume of thickness × width × 1 m, and its mass is that volume times the density. With thickness and width in millimetres and the density of steel at 7.85 g/cm³, one metre of strip weighs thickness × width × 7.85 ÷ 1000 kg. As a check, 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip weighs 7.85 kg per metre. In US units, multiply kg per metre by 0.672 to get lb per ft.

From the mass per metre follow the two basic conversions: the length of strip in a coil is the coil weight divided by the mass per metre, and the weight of a given length is the length times the mass per metre. For a 10 t coil of 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip, 10,000 ÷ 7.85 is about 1274 m (4179 ft); in pounds, 10 t is about 22,046 lb.

Coil outer diameter

When strip is wound on a core, the wound layers form a ring between the inner diameter (ID) and the outer diameter (OD). The ring has the area π/4 × (OD² − ID²), and for tightly wound strip it equals thickness × length. Solving for OD gives √(ID² + 4 × thickness × length ÷ π), and solving for length gives π × (OD² − ID²) ÷ (4 × thickness). In the example above, 1274 m of 1.0 mm (0.039 in) strip on a 610 mm (24 in) inner diameter gives an outer diameter of about 1412 mm (55.6 in). Real coils wind slightly looser, so the actual outer diameter is somewhat larger than this theoretical value.

The width does not appear in the outer diameter formula for a given length, but it does when you start from the weight, because the weight fixes the length through the mass per metre. Our coil product pages list inner diameters of 508 and 610 mm (20 and 24 in).

Coating mass

Coating mass in g/m² is given for both sides of the strip together, for example in EN 10346 and in ASTM A653 (zinc) and A792 (55% Al-Zn), where 1.00 oz/ft² equals 305 g/m². Because the figure covers both sides, the coating mass per metre of strip is coating mass × width ÷ 1,000,000 in kg. The calculator adds this to the steel mass. The entered thickness is treated as the steel thickness, so if your thickness includes the coating, the result is slightly high. For 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip with 275 g/m² the coating adds 0.275 kg per metre, giving 8.125 kg per metre. See the galvanized coil and Aluzinc coil pages for coating ranges.

Worked examples

The table uses uncoated strip at 7.85 g/cm³. The form above uses the same functions, so both always agree.

Limits of the theoretical weight

  • Tolerance: thickness and width are nominal. Strip within tolerance can be heavier or lighter than nominal.
  • Density: steel density depends on the alloy and is quoted as about 7750 to 8050 kg/m³, so 7.85 g/cm³ is a typical value, not an exact one.
  • Coating and oil: coated and oiled coil weighs a little more than the steel alone; the coating field covers the coating only.
  • Packing: the packing list weight may include core, wrapping and straps, depending on how it is stated.
  • Winding: loose or uneven winding makes the outer diameter larger than calculated.

Treat the result as a planning figure and the weight in the quotation and on the packing list as final. To order, see the coil range and send your thickness, width, inner diameter and maximum coil weight through the quote form; the quotation comes within 12 hours at the latest.

Related coil guides: how to choose between slit and full-width coil; galvanized or Aluzinc coating; hot rolled or cold rolled.

Questions buyers ask

How do I calculate the weight per metre of steel strip?

Multiply thickness in millimetres by width in millimetres by 7.85 and divide by 1000. The result is kilograms per metre. For 2 mm (0.079 in) × 1500 mm (59.06 in) strip, 2 × 1500 × 7.85 ÷ 1000 = 23.55 kg per metre (15.8 lb per ft).

How do I find the length of strip in a coil from its weight?

Divide the coil weight in kg by the strip mass per metre. A 10 t coil of 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip is 10,000 ÷ 7.85 = about 1274 m (4179 ft) long.

How do I calculate the outer diameter of a coil?

The wound strip fills a ring between the inner and outer diameter, so π/4 × (OD² − ID²) = thickness × length. Solve for the outer diameter: OD = √(ID² + 4 × thickness × length ÷ π). For 1274 m of 1.0 mm (0.039 in) strip on a 610 mm (24.02 in) inner diameter this gives about 1412 mm (55.6 in).

Does the coating change the weight?

Yes, a little. Coating mass in g/m² is given for both sides together, so the calculator adds coating mass × width per metre of strip. On 1.0 mm (0.039 in) × 1000 mm (39.37 in) strip a 275 g/m² coating adds 0.275 kg per metre, about 3.5% on top of the steel.

Which density does the calculator use?

7.85 g/cm³ (7850 kg/m³), the value usually given for carbon steel. Steel density is quoted as about 7750 to 8050 kg/m³ depending on the alloy, so the result is theoretical.

Why does the weight on the packing list differ from the calculation?

The calculator uses nominal thickness and width. Thickness tolerance, the real density of the grade, coating mass, oil, packing material and the winding of the coil all change the real figure, so the weight on the packing list is the final one.

What coil inner diameters and weights do your coil pages list?

The inner diameter is 508 or 610 mm (20 or 24 in) and coil weights run up to 30 t (about 66,000 lb), depending on the product. Prepainted coil is listed up to 15 t. The exact limits are confirmed in the quotation.

Can the calculator be used for slit coil?

Yes. Enter the slit width as the width. Because strip mass is proportional to width, a slit coil weighs its width share of the master coil it was cut from.

Sources

Request a quote

Tell us the specification you need and we will check it with manufacturers in Türkiye. We reply with a quotation within 12 hours.

Request a quote