Spring steel wire from Türkiye

Why buy spring steel wire from Turkey?

Spring wire is made from high carbon steel, a group of steels used for springs and high-strength wires because carbon raises the strength of the steel. Spring steels have a very high yield strength, so a part made from them returns to its original shape after significant bending, twisting or deflection. The trade-off is ductility: as carbon rises, the steel becomes less ductile, which is why the exact specification matters more here than for a soft wire.

Sourcing high carbon spring wire from Türkiye through Reinwent gives you one point of contact for a product where the details decide everything. We take your spring drawing or customer specification to manufacturers in Türkiye, ask them to quote against it rather than against a catalogue grade, and report back what can be supplied and to which standard.

What spring steel wire can you order from Türkiye?

The table shows what we state for spring steel wire, read from the same data as our high carbon spring wire page. Only the diameter range is published; the standard is listed as on request because it is set per order.

We do not publish strength grades or tensile levels for this product. In your request, include the diameter, the standard your drawing names, whether the spring carries a static or a dynamic load, and the quantity. The quotation then states the standard and grade that apply to your order.

How is spring wire shipped from Türkiye?

Spring wire ships in coils, usually by sea in standard dry containers. Published payload limits are about 25 to 28.3 tonnes for a 20 ft container and about 26.8 to 28.8 tonnes for a 40 ft container, depending on the carrier and the container itself.

The load per container depends on the coil weight and the packaging and is confirmed per order. The container loading guide lists the published figures for both container sizes and what to include in a request.

Which standards exist for spring steel wire?

Two standards are commonly named for spring wire. EN 10270-1 covers patented cold drawn unalloyed steel wire of circular cross-section for mechanical springs, for both static and dynamic duty. ASTM A227 covers round cold-drawn steel spring wire for mechanical springs, rings and wire forms that are not subject to high stress and do not require high fatigue properties.

Which standard, and which grade within it, applies to your order is not stated on this page: it is confirmed in the quotation after we check your specification with manufacturers. Our guide to spring wire standards explains what each standard covers.

Questions about high carbon spring wire from Türkiye